APM 2730 Product form: Hot isostatic pressed (HIP) products
Standard: UNS S31803, S32205 | ASTM M3:2 + Co | EN number 1.3294
APM 2730 is a high alloyed powder metallurgical high speed steel corresponding to ASTM M3:2 +Co with a combination of very good abrasive wear resistance, high compressive strength and good high temperature properties. Suitable areas of use include demanding cold-work applications like blanking of harder materials like carbon steel or cold-rolled strip steel, as well as use for cutting tools.
AquaSan Ni50 Product form: Covered electrodes
AquaSan Ni50 is a specially formulated, nickel based covered electrode with a waterproof coating for the welding of high strength steels with a Carbon Equivalent (CE) >0.4.
Esshete 1250 Product form: Tube and pipe, seamless
Standard: UNS S21500 | EN number 1.4982
An austentic chromium-nickel steel for high-temperature applications. The grade is characterized by very good resistance to steam and flue gas atmospheres and commonly used in boiler applications.
Pressurfect Product form: Tube and pipe, seamless
Standard: UNS S30403 | ASTM TP304L | EN number 1.4306
Pressurfect is an austenitic stainless chromium-nickel steel with a low carbon content used for high pressure gasoline direct injection (GDI) fuel systems. The grade is characterized by:
- Good corrosion resistance
- Excellent toughness
- Excellent bendability
Pressurfect CNG Product form: Tube and pipe, seamless
Standard: UNS S31603, S31600 | ASTM TP316L, TP316 | EN number 1.4435, 1.4436
An austenitic stainless steel with a low carbon content alloyed with min. 2.5% molybdenum.
Pressurfect XP Product form: Tube and pipe, seamless
Standard: UNS S32304 | EN number 1.4362
Pressurfect XP is a duplex (austenitic-ferritic) stainless steel used for high pressure gasoline direct injection (GDI) fuel systems. The grade is characterized by:
- Very good resistance to stress corrosion cracking (SCC)
- Good resistance to general corrosion and pitting
- High strength - approximately twice the proof strength of austenitic stainless steels
- Physical properties that offer design advantages
- Ease of fabrication and good toughness
Safeni 48 (Several product forms available)
UNS K94800, K94840
A soft magnetic iron-nickel alloy characterized by high magnetic permeability, low coercive force and high saturation flux density.
Safeni 52 (Several product forms available)
A soft magnetic iron-nickel alloy with high magnetic permeability, low coercive force, a low content of non-metallic inclusions and thermal expansion properties which make it suitable for glass-sealing applications.
Safurex Product form: Tube and pipe, seamless
Standard: UNS S32906 | EN number 1.4477
Safurex is a high-alloy duplex (austenitic-ferritic) stainless steel developed to withstand the corrosive environments present in the Stamicarbon urea process. The grade is characterized by:
Standard: UNS S43000 | ASTM 430 | EN number 1.4016
A ferritic stainless steel with minimum 16% chromium that has lower tensile strength, elongation and impact resistance than austentic stainless steels. The proof strength is somewhat higher.